24V 2.2KW 6L Hydraulic Power Units have carved out a favorable market in numerous provinces and municipalities across the nation and have also been exported to countries and regions like India, Indonesia, Turkey, South Africa, the United States, New Zealand, Singapore, and South Korea. We are also open to OEM and ODM orders. Whether you opt for existing products from our product catalog or seek engineering expertise for your specific application, you can liaise with our customer service department concerning your procurement requisites.
The 24V 2.2KW 6L Hydraulic Power Unit is a meticulously designed and compact device. It weighs [weight not provided] and has dimensions of 53 * 26 * 27 cm. This power unit is engineered to offer reliable hydraulic power in various applications that require a 24V power source and moderate power output.
II. Performance Characteristics
1. Power Output and Voltage
Operating at a voltage of 24V and with a power rating of 2.2KW, this hydraulic power unit is suitable for a range of scenarios where a lower voltage supply is available or preferred. The motor is designed to provide efficient power conversion, with an efficiency rate of approximately [X]% (for example, 80%). This allows it to deliver sufficient mechanical energy to drive the hydraulic pump, which in turn generates the necessary hydraulic pressure to operate various hydraulic components.
2. Hydraulic Capacity
The 6L reservoir capacity is carefully calculated to ensure an adequate supply of hydraulic fluid for continuous operation. The reservoir is constructed with materials that resist corrosion and maintain the quality of the fluid. The hydraulic circuit is designed with precision, featuring pipes and fittings that minimize pressure losses. The internal diameter of the main hydraulic lines is typically around [Y] mm (for example, 8 mm), ensuring smooth fluid flow and efficient power transmission to the actuators.
3. Pressure and Flow Rate
The unit is capable of generating a maximum pressure of up to [P] MPa (for example, 12 MPa), which can be adjusted within a certain range, usually from [P1] MPa to [P2] MPa (such as 4 MPa to 12 MPa), to meet the specific requirements of different applications. The flow rate of the hydraulic fluid can reach a maximum of [Q] L/min (for example, 10 L/min). This combination of pressure and flow rate allows for precise control of hydraulic cylinders and motors. For instance, it can control the speed and force of a hydraulic cylinder's extension and retraction, enabling it to perform tasks such as lifting, pushing, or pulling with accuracy.
4. Durability and Reliability
Built with high-quality materials and advanced manufacturing techniques, this power unit is designed to withstand harsh operating conditions. The motor and pump are made of durable alloys and are rigorously tested for durability and performance. It can endure vibrations up to [V] mm/s (such as 2.5 mm/s) and temperature fluctuations within a range of [T1] °C to [T2] °C (such as -10 °C to +50 °C). The unit is also equipped with safety features such as overpressure protection and thermal overload protection, ensuring reliable and safe operation over an extended period.
III. Application Range
1. Mobile Equipment
In small utility vehicles, it can power hydraulic systems for functions like lifting and dumping cargo beds. The compact size and 24V power requirement make it suitable for integration into these vehicles, enhancing their functionality.
Golf carts with hydraulic attachments, such as adjustable seats or lifting platforms, can utilize this power unit. It provides the necessary power for smooth operation of these attachments, improving the user experience.
Mini forklifts can use it to drive the lifting and tilting mechanisms of the forks. The adjustable pressure and flow rate allow for precise control of the load handling, making it suitable for light-duty material handling tasks.
2. Light Industrial Machinery
Small presses can benefit from the power unit to provide the necessary force for shaping or stamping small parts. The precise control of pressure and flow rate ensures accurate and consistent results in the manufacturing process.
Packaging equipment uses the unit to drive mechanisms for cutting, folding, and sealing packaging materials. It enables efficient and reliable operation of these functions, improving the productivity of the packaging line.
Assembly line tools like pneumatic or hydraulic riveting guns can be powered by this unit, ensuring efficient and accurate assembly operations. The ability to adjust the power output allows for customization based on the specific requirements of different assembly tasks.
3. Marine Applications
In small boats and yachts, it can power hydraulic systems for functions like trim tabs adjustment. This helps in controlling the boat's attitude in the water, improving its stability and performance.
It can also be used for operating small davits or winches for launching and retrieving dinghies or other small watercraft. The reliable operation of the power unit is crucial in these marine applications, ensuring the safety and convenience of boat operations.
4. Renewable Energy Systems
Some small wind turbines or solar tracking mechanisms can utilize this hydraulic power unit. In wind turbines, it can be used to adjust the pitch of the blades or to control the yaw of the turbine, optimizing its energy capture efficiency.
Solar tracking systems use it to move the solar panels to follow the sun's path, maximizing the energy output. The compact size and relatively low power consumption of the unit make it suitable for these applications where space and energy efficiency are important.
IV. Usage Scenarios
1. Workshop and Garage
In a workshop or garage, the power unit can be used for various tasks. It can power hydraulic jacks for lifting vehicles during maintenance and repair work. The adjustable pressure allows for safe and controlled lifting, preventing damage to the vehicle.
It can also be used for operating small hydraulic presses for bending or shaping metal parts. The precise control of the hydraulic power enables accurate and repeatable results in metalworking.
Additionally, it can drive hydraulic tools like impact wrenches or nut runners, providing the necessary torque for fastening and loosening bolts. The ability to adjust the power output makes it suitable for different bolt sizes and torque requirements.
2. Outdoor Recreational Activities
During outdoor camping or RV setups, it can power hydraulic leveling systems for trailers or motorhomes. This ensures a stable and comfortable living space, enhancing the camping experience.
It can also be used in portable hydraulic lifts or platforms for loading and unloading equipment or for providing access to elevated areas for activities like treehouse construction or outdoor stage setup. The compact size and portability of the power unit make it convenient for these outdoor applications.
3. Small-scale Farming and Gardening
In small-scale farming and gardening, it has several applications. It can power small hydraulic pumps for irrigation systems, allowing for efficient water distribution. The adjustable flow rate can be used to control the water pressure and volume, depending on the needs of different plants.
It can also be used in small tractor attachments like post-hole diggers or tillers, providing the necessary power for these tasks. The reliable operation of the power unit ensures the efficient operation of farming equipment.
Additionally, it can operate hydraulic gates or fences, making it convenient to manage livestock or access different areas of the farm or garden. The ability to control the hydraulic power remotely or automatically can improve the convenience and security of farming operations.
4. Indoor Automation and Robotics
In indoor automation and robotics projects, this hydraulic power unit can be integrated. For example, in small robotic arms used in laboratories or light manufacturing, it can provide the power for precise movements and gripping actions. The adjustable pressure and flow rate allow for fine-tuning the performance of the robotic arm, enabling it to handle delicate objects with care.
It can also be used in automated conveyor systems with hydraulic actuators for sorting or transporting small items. The reliable operation of the power unit ensures the smooth and efficient operation of the conveyor system, improving the productivity of the automation process.
V. Specification Dimensions
The product has a length of 53 cm, a width of 26 cm, and a height of 27 cm. The compact size makes it suitable for installation in tight spaces or on mobile equipment. The layout of the components within the unit is optimized to make the most of the available space while ensuring easy access for maintenance and repair. The overall dimensions are carefully designed to balance performance and portability, making it an ideal choice for a wide range of applications where space is limited and a 24V power supply is available.
In conclusion, the 24V 2.2KW 6L Hydraulic Power Unit offers excellent performance, a diverse application range, and is suitable for various usage scenarios. Its compact size and reliable operation make it a valuable component in many mobile, industrial, marine, renewable energy, and other applications.
24V2.2KW6L Hydraulic Power Unit
Motor
24V 2.2KW
Pressure
18Mpa
Mounting
Horizontal
Pump
2.1 cc/r
Tank Capacity
6L
Hot Tags: 24V 2.2KW 6L Hydraulic Power Unit, China, Manufacturer, Supplier, Factory, Cheap, Quality, Quotation
For inquiries about hydraulic fittings, hydraulic power units, hydraulic cylinders or price list, please leave your email to us and we will be in touch within 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy